Buying an owl box for sale is a great way to help support raptor populations. However, it’s important to understand that there is no guarantee that the boxes will be occupied by Barn Owls or any other species of raptor. It is also essential that the box is correctly installed, to maximize its chances of being occupied. A poorly positioned or constructed box will be of no use to owls and could cause serious injury. To ensure that your owl box will be a success, read the articles below and follow the advice carefully.

A well positioned owl nesting box can help to reduce the need for pesticides in agriculture and reduce rodent numbers across a landscape. The common Barn Owl is an expert rodent hunter that primarily nests in cavities at well-positioned sites. A single adult owl can consume 1,000 pocket gophers or other small rodents in one year and a family of owlets can consume 3,000. However, the availability of suitable habitat is reducing and this has resulted in a decline in the number of nesting sites for Barn Owls.

It is therefore essential to provide suitable habitat for Barn Owls and other cavity-nesting raptor species by providing nesting sites in the countryside. The most likely sites to attract Barn Owls are open farmland landscapes and rural woodland with patches and strips of rough grassland. It is unlikely that Barn Owls will take up residence in densely wooded or urban areas.

Barn Owl nest boxes should be positioned so that the entrance hole faces open ground and is not obscured by vegetation. Trees with low branches or those screened by other trees are usually unsuitable because the entrance hole would be hidden. Nesting boxes should be erected on or near to ground level where possible but not within 1 km of any motorway, dual-carriageway or similar unscreened major road. This is to avoid the risk of road-deaths of young birds.
 https://nestvui.com/yen-dao-thien-nhien-tinh-che-loai-1-100g/ should be substantially constructed but still light enough to permit safe and easy erection using basic equipment. It should be made from rot-resistant ply or Tanalith E treated sheet material (EN314-2, Class 3). It should be coated with a water repellent preservative before being assembled and fixed into the chosen site.

The owl box should be no less than 450mm deep. https://nestvui.com/yen-tinh-che-rut-long-uot-nguyen-to-100g/ reduces the risk of a young owlet falling from the box before it is ready to fly and dying. The internal depth should be maintained by clearing out debris when necessary (wear gloves and a dust mask).

Owl boxes can be fixed to a tree, pole or wall but on the whole it is better for them to be mounted on a tree as they can be provided with extra shelter and the entrance hole will not be exposed to prevailing weather conditions. A tree-mounted box is also more practical than a nest box on a pole, especially for children who may wish to observe the progress of their owlets.